HPE FlexNetwork 5140 24G 4SFP+ EI, Managed, L3, Gigabit Ethernet (10/100/1000), Full duplex, Rack mounting, 1U
- $1,568.00 In Stock - Ships Worldwide Order by 2:00 PM ET for Overnight Shipping
-
Warranty: 90-day return/replacement
Click here to read our Return Policy for returns/replacements.
- Authenticity: Original Genuine OEM
HPE FlexNetwork 5140 24G 4SFP+ EI Managed L3 Gigabit Ethernet (10/100/1000) 1U
Free ground shipping within the
United States
Government, Federal & Education Procurement
We support quotes, POs, stock docs, and compliance invoicing.
Email: support@buyrouterswitch.com SAM.gov Registered Vendor CAGE Code : 23P86
overview
specifications
resources
faqs
reviews
JL828A Overview
The HPE FlexNetwork 5140 EI Switch Series delivers scalability, high availability, and low TCO at the access layer of medium and large enterprise campus networks. The series offers enterprise-class QoS and security, Hewlett Packard Enterprise Intelligent Resilient Fabric (IRF) stacking, static layer 3 routing and RIP, convenient fixed 10GbE uplink ports, PoE+, ACLs, and IPv6, and delivers energy savings with Energy Efficient Ethernet.
The HPE FlexNetwork 5140 EI Switch Series also includes Smart Management Center (SmartMC), an embedded network management tool that can be leveraged at no additional cost by small and medium networks for centralized management and operations. The series can also be managed with HPE Intelligent Management Center (IMC) for a single view of your entire network.
Features
Scalability and High Availability
- The HPE FlexNetwork 5140 EI Switch Series delivers scalability and enhances reliability of the network with HPE Intelligent Resilient Fabric (IRF) technology. IRF stacking enables virtual resilient switching fabrics, where two or more switches perform as a single L2 switch and L3 router.
- IRF stacking enhances performance and reliability with uninterrupted L2 switching and L3 forwarding and reduces operational complexity with simpler, flatter, and more agile networks.
- Four fixed uplinks (SFP, SFP+, and 10GBASE-T) deliver performance for bandwidth intensive applications.
- Link redundancy with support for protocols such as Spanning Tree/MSTP, RSTP, and Smart link provides high availability.
Comprehensive Security Control
- The HPE FlexNetwork 5140 EI Switch Series supports flexible authentication methods including 802.1X and MAC Authentication for greater security and policy-driven application authentication. Per-user access control lists (ACLs) provide identity-driven security and access control.
- ACLs provide IP Layer 2 to Layer 4 traffic filtering while supporting global ACL, VLAN ACL, port ACL, and IPv6 ACL.
- Dynamic ARP protection with functions such as ARP Detection and ARP packet validation that block broadcasts from unauthorized hosts, preventing eavesdropping or theft of network data.
- Centralized security policy management and network protection with HPE Intelligent Management Center (IMC) End User Admission Domination (EAD) which integrates security policies, network access control, and access right control policies to form a cooperative security system.
- Enhance security with encryption of access methods (CLI, GUI, or MIB) through SSHv2, SSL, and/or SNMPv3, and other features including DHCP protection, IP source guard, and RADIUS/HWTACAS.
Simplified Management
- The HPE FlexNetwork 5140 EI Switch Series can be seamlessly managed with HPE Intelligent Management Center (IMC) to provide end-to-end network transparency with a consistent network experience through comprehensive configuration, compliance, and policy management.
- Supports SmartMC, an embedded network management tool with a web-based GUI to simplify operations and facilitate centralized management. It offers features such as configuration backup, software version management and seamless switch replacement.
- RMON and sFlow provide advanced monitoring and reporting capabilities for statistics, history, alarms, and events.
Enhanced Quality of Service
- The HPE FlexNetwork 5140 EI Switch Series supports advanced classifier-based QoS which groups traffic using multiple match criteria based on Layer 2 and 3 information, it applies QoS policies such as setting priority level and rate limit to selected traffic on a port, VLAN, or entire switch.
- Provides traffic prioritization with supported congestion actions include: strict priority (SP) queuing, weighted round robin (WRR), weighted random early detection (WRED), and SP+WRR and traffic policing with Committed Access Rate (CAR) and line rate.
- Reduce unwanted network traffic with broadcast control and limitation of broadcast traffic rate to cut down on unwanted network broadcast traffic.
FlexNetwork 5140 24G 4SFP+ EI Switch
- Managed L3 Web-based management
- Quality of Service (QoS) support
- Basic switching RJ-45 Ethernet ports quantity: 24 Console port: RJ-45
- 10G support
- MAC address table: 16384 entries Switching capacity: 128 Gbit/s
- Access Control List (ACL)
- 1U Rack mounting Stackable
- AC Power supply included
Summary Description
HPE FlexNetwork 5140 24G 4SFP+ EI, Managed, L3, Gigabit Ethernet (10/100/1000), Full duplex, Rack mounting, 1U
Need help with JL828A?
Get pricing, availability, lead time, and compatible options from our team. Chat with us live or email support@buyrouterswitch.com
JL828A Specifications
Overview
Manufacturer:
HPE
Stock:
In Stock.
Stock updated on:
2024-09-29
Management features
Switch type
Managed
Switch layer
L3
Quality of Service (QoS) support
Yes
Web-based management
Yes
Ports & interfaces
Basic switching RJ-45 Ethernet ports quantity
24
Basic switching RJ-45 Ethernet ports type
Gigabit Ethernet (10/100/1000)
SFP+ module slots quantity
4
Console port
RJ-45
Network
Networking standards
IEEE 802.1AX, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1ab, IEEE 802.1ad, IEEE 802.1ak, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ac, IEEE 802.3ad, IEEE 802.3ae, IEEE 802.3az, IEEE 802.3i, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
10G support
Yes
Port mirroring
Yes
Full duplex
Yes
Flow control support
Yes
Link aggregation
Yes
Broadcast storm control
Yes
Auto MDI/MDI-X
Yes
Spanning tree protocol
Yes
Auto-sensing
Yes
VLAN support
Yes
Data transmission
Switching capacity
128 Gbit/s
Throughput
96 Mpps
MAC address table
16384 entries
Latency (1 Gbps)
5 µs
Latency (10 Gbps)
3 µs
Jumbo frames support
Yes
Security
DHCP features
DHCP server
Access Control List (ACL)
Yes
IGMP snooping
Yes
Authentication
MAC-based authentication
Authentication type
HWTACACS, RADIUS
Multicast features
Multicast support
Yes
Protocols
Routing protocols
OSPF, OSPFv2, OSPFv3, RIP, RIP-2
IPv4 FIB entries
512
IPv6 FIB entries
256
Design
Rack mounting
Yes
Stackable
Yes
Form factor
1U
Performance
Physical stacking (units)
9
Memory type
SDRAM
Internal memory
512 MB
Flash memory
256 MB
Power
Power source
AC
Power supply included
Yes
AC input voltage
100 - 240 V
AC input frequency
50 - 60 Hz
Power consumption (max)
24 W
Power over Ethernet (PoE)
Power over Ethernet (PoE)
No
Operational conditions
Operating temperature (T-T)
-5 - 45 °C
Storage temperature (T-T)
-40 - 70 °C
Operating relative humidity (H-H)
10 - 90%
Storage relative humidity (H-H)
5 - 95%
Weight & dimensions
Width
440 mm
Depth
160 mm
Height
43.6 mm
Weight
2.5 kg
Resources
Documents
Frequently Asked Questions
What are the primary uplink capabilities of the HPE FlexNetwork 5140 24G 4SFP+ EI switch? +
The HPE FlexNetwork 5140 24G 4SFP+ EI features four fixed 10GbE SFP+ ports designed for high-speed fiber uplinks. These ports allow for flexible integration into existing 10GbE core environments, providing the necessary bandwidth to prevent bottlenecks when aggregating traffic from 24 Gigabit Ethernet access ports to the enterprise network backbone.
Is the HPE FlexNetwork 5140 24G EI suitable for Layer 3 routing tasks? +
Yes, this switch is designed as an Intelligent Resilient Framework (IRF) capable Layer 3 managed switch. It supports advanced routing protocols, including static routing and RIP, making it a robust solution for inter-VLAN routing and small-to-medium enterprise core or distribution layer deployments where efficient traffic management and local packet forwarding are required.
Can the HPE 5140 24G 4SFP+ EI be stacked with other units? +
This model supports HPE’s Intelligent Resilient Framework (IRF) technology. IRF allows you to stack multiple physical switches together to operate as a single virtual entity. This simplifies network management, enhances availability through distributed link aggregation, and allows for seamless capacity expansion as your enterprise network requirements scale over time.
What is the physical form factor of the HPE FlexNetwork 5140 24G switch? +
The HPE FlexNetwork 5140 24G 4SFP+ EI comes in a standard 1U rackmount form factor. Its compact design ensures it fits efficiently into standard 19-inch server racks or telecommunications cabinets, making it ideal for wiring closets or data center environments where rack space optimization is a critical operational requirement.
How do I manage the HPE 5140 24G EI switch in an enterprise environment? +
This switch offers comprehensive management options, including a command-line interface (CLI) via console port, SNMP for network monitoring, and a web-based GUI for intuitive configuration. These management interfaces provide deep visibility into switch performance, port status, and security settings, ensuring IT administrators can effectively monitor and maintain the health of the network infrastructure.
Does the HPE FlexNetwork 5140 24G support advanced security features? +
Security is a core focus for the 5140 EI series. It includes robust features such as IEEE 802.1X authentication, port security, and Access Control Lists (ACLs) to regulate traffic based on source, destination, or protocol. These tools help prevent unauthorized access and protect your network from malicious activity, ensuring a secure communication environment for all connected users and devices.
What power and cooling considerations should I have for the JL828A? +
The HPE 5140 24G 4SFP+ EI is designed for standard enterprise environments with integrated cooling fans to maintain optimal operating temperatures. Before deployment, ensure your rack has adequate airflow and that your power distribution units (PDUs) can support the device's specific power input requirements to maintain hardware longevity and reliability under consistent load.
Which software features are included with the EI (Enterprise Implementation) designation? +
The 'EI' designation indicates that this switch includes an advanced feature set compared to base models. This includes support for enhanced Layer 3 routing, sophisticated Quality of Service (QoS) for traffic prioritization, and comprehensive multicast protocols. It is engineered to provide the high performance and service reliability required for enterprise-grade campus networks and demanding branch office environments.
How can I obtain a bulk quote for multiple HPE 5140 24G switches for a large project? +
At BuyRouterSwitch.com, we specialize in supporting large-scale infrastructure deployments. If you are planning a significant network upgrade or need a high volume of JL828A units, please reach out to our dedicated sales team. We provide customized bulk pricing and assistance to ensure your organization receives competitive quotes tailored to your specific project requirements and budget.
Why should I choose BuyRouterSwitch.com for my HPE hardware procurement? +
BuyRouterSwitch.com is a trusted source for authentic HPE enterprise networking hardware. We focus on providing a seamless purchasing experience with secure ordering processes and direct access to professional sales support. By partnering with us, you gain a reliable supply chain partner dedicated to delivering the professional-grade networking equipment necessary to build and sustain your high-performance enterprise network.
Need Help Choosing the Right Part? Talk to an Expert
-
+1 (800) 870-9487Mon-Fri 8am-5pm EST
-
support@buyrouterswitch.comTechnical support
