JH326A - HP 5130 HI Switches

JH326A Specifications

Physical specifications

Type

HPE 5130 48G PoE+ 4SFP+ HI with 1 Interface Slot Switch

Dimensions (H x W x D)

4.37 x 43.99 x 46 cm (1.72 x 17.32 x 18.11 in) (1U height)

Weight

12.5 kg (27.56 lb)

System specifications

1000 Mb Latency

< 5 µs

10 Gbps Latency

< 3 µs

Throughput

up to 190.5 Mpps

Routing/Switching capacity

256 Gbps

Routing table size

32768 entries (IPv4), 16384 entries (IPv6)

MAC address table size

32768 entries

I/O ports and slots

48 RJ-45 autosensing 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only; Ports 1 - 8 support MACSec

4 SFP+ 10GbE ports

1 port expansion module slot

Supports a maximum of 6 SFP+ ports or 2 1/10GBASE-T ports, with optional module

Power supplies

2 power supply slots

1 minimum power supply required (ordered separately)

Fan tray

Airflow direction is Front (port side) to Back (power cord side)

Memory and processor

2 GB SDRAM; Packet buffer size: 4 MB, 512 MB flash

Mounting and enclosure

Mounts in an EIA standard 19-inch telco rack or equipment cabinet (hardware include

Electrical specifications

Frequency

50/60 Hz

Maximum heat dissipation

2286 BTU/hr (2411.73 kJ/hr), Heat dissipation ranges from 256 BTU/hr to 6142 BTU/hr, depending on power supply configuration

Voltage

100 - 240 V ac, rated (90 - 264 V ac, max) -48 to -60 V dc, rated) (depending on power supply chosen)

Maximum power rating

670 W

Idle power

75 W

PoE power

1440 W PoE+

Environmental specifications

Operating temperature

0°C to 45°C(32°F to 113°F)

Operating relative humidity

10% to 90%, noncondensing

Nonoperating/Storage temperature

-40°C to 70°C (-40°F to 158°F)

Nonoperating/Storage relative humidity

5% to 95%, noncondensing

Acoustic

Low-speed fan: 57.6 dB, High-speed fan: 66.9 dB; ISO 7779

Safety certifications

Safety

UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1; FDA 21 CFR Subchapter J; ROHS Compliance; AS/NZS 60950-1; GB 4943; EAC (EurAsian Conformity Certification)

Emissions

EMC Directive 2004/108/EC; FCC (CFR 47, Part 15) Class A; EN 61000-4-11:2004; ANSI C63.4-2009; EN 61000-3-3:2008; VCCI V-4/2012.04; EN 6100-3-2:2006+A1:2009 + A2:2009; EN 61000-3- 2:2006+A1:2009+A2:2009 ; EN 61000-4-3:2006; EN 61000-4-4:2012; EN 61000-4-5:2006; EN 61000- 4-6:2009; AS/NZS CISPR 22:2009 Class A; CISPR 22:2008 Class A; EN 55022:2010 Class A; EN 61000- 4-29: 2000; CISPR 24:2010; EN 300 386 V1.6.1; VCCI V-3/2013.04 Class A

Immunity

Generic EN 55024

ESD EN300 386

Management

IMC - Intelligent Management Center, Command-line interface, Web browser, SNMP manager