Cisco DS-SFP-GE-T network transceiver module Copper 1000 Mbit/s
-
$56.55 In Stock - Ships Worldwide Order by 2:00 PM ET for Overnight ShippingWas: $65.00You Save: $8.45 13% OFF
-
Warranty: 90-day return/replacement
Click here to read our Return Policy for returns/replacements.
DS-SFP-GE-T
Free ground shipping within the
United States
Government, Federal & Education Procurement
We support quotes, POs, stock docs, and compliance invoicing.
Email: support@buyrouterswitch.com
overview
specifications
faqs
reviews
DS-SFP-GE-T Overview
CISCO DS-SFP-GE-T 1gb Copper Rj-45 Sfp Transceiver Module
Summary Description
Cisco DS-SFP-GE-T. SFP transceiver type: Copper, Maximum data transfer rate: 1000 Mbit/s, Interface type: SFP
Need help with DS-SFP-GE-T?
Get pricing, availability, lead time, and compatible options from our team. Chat with us live or email support@buyrouterswitch.com
Specifications
Overview
| Condition | Refurbished |
|---|---|
| Brand | Cisco |
| Stock | In Stock |
Performance
| SFP transceiver type | Copper |
|---|---|
| Maximum data transfer rate | 1000 Mbit/s |
| Interface type | SFP |
| Ethernet LAN (RJ-45) ports | 1 |
Features
| Plug and Play | Yes |
|---|---|
| Hot-swap | Yes |
Frequently Asked Questions (FAQs)
What is the primary function of the Cisco DS-SFP-GE-T module? +
The Cisco DS-SFP-GE-T is a 1000BASE-T copper SFP transceiver designed to provide Gigabit Ethernet connectivity over standard Category 5 twisted-pair cabling. It enables network administrators to link SFP-enabled switch ports to existing copper-based infrastructure, offering a flexible solution for short-reach connections without the need for expensive fiber-optic cabling in data center or wiring closet environments.
Which cable type and maximum distance does the DS-SFP-GE-T support? +
This transceiver is engineered for use with Category 5, 5e, or 6 unshielded twisted-pair (UTP) copper cabling. Under optimal conditions, it supports reliable Gigabit Ethernet data transmission at distances of up to 100 meters (328 feet). It is an ideal choice for connecting end devices like servers, workstations, or uplink switches located within the same rack or adjacent cabinets.
Is the DS-SFP-GE-T compatible with non-Cisco networking hardware? +
While the DS-SFP-GE-T is a Cisco-branded optic designed specifically for seamless integration with Cisco switches and routers, compatibility with third-party hardware depends on the specific device's support for standard SFP interfaces. Always check your target equipment's documentation or compatibility matrix to ensure it supports 1000BASE-T copper SFP transceivers, as some vendors enforce proprietary coding requirements that may impact interoperability.
How does the DS-SFP-GE-T compare to fiber-based SFP modules? +
Unlike fiber SFP modules that use light to transmit data, the DS-SFP-GE-T utilizes electrical signals over copper wires. Fiber modules are generally preferred for long-distance runs or environments with high electromagnetic interference, while the copper-based DS-SFP-GE-T is more cost-effective for short-range deployments, utilizing your existing RJ-45 copper cabling infrastructure to reduce overall hardware and deployment expenditures.
Can I use the DS-SFP-GE-T in a 10G SFP+ port? +
The DS-SFP-GE-T is designed as a Gigabit Ethernet interface. Its compatibility with an SFP+ port depends entirely on the specific switch's ability to support multi-rate or dual-rate speeds. Many Cisco platforms allow SFP modules to function in SFP+ slots, but you must verify that your switch software configuration supports 1G operation on that particular physical port before installation.
What management features does this SFP transceiver provide? +
As a passive transceiver, the DS-SFP-GE-T does not have an independent IP address or software interface. Instead, it is managed directly through the host switch's command-line interface or management console. Once inserted, the device communicates physical status, link speed, and diagnostic data to the switch, which presents this information via standard SNMP or vendor-specific monitoring tools.
What are the power requirements for this module? +
The DS-SFP-GE-T is powered directly by the switch port into which it is installed, adhering to the standard SFP power budget specifications defined by the SFF-8472 standard. It is designed for low power consumption, making it an efficient choice for high-density switch configurations where minimizing total heat output and electrical load is essential for rack-level efficiency.
Are there specific environmental conditions for deploying this transceiver? +
This module is built for standard data center environments. It should be operated within typical temperature and humidity ranges specified for enterprise networking gear. To ensure maximum reliability and prevent signal degradation, maintain proper airflow in your rack and ensure the module is fully seated in the SFP slot with the bail latch correctly secured.
How can I obtain a bulk quote for the DS-SFP-GE-T from BuyRouterSwitch.com? +
If you are planning a large-scale infrastructure upgrade or need a significant quantity of DS-SFP-GE-T modules, our team is ready to assist. Simply navigate to the product page on BuyRouterSwitch.com and use our bulk inquiry form or contact our sales department directly. We provide competitive volume pricing tailored to the specific needs and project scales of our enterprise clients.
Why should I choose BuyRouterSwitch.com for my Cisco equipment needs? +
BuyRouterSwitch.com is a trusted source for enterprise-grade networking components, providing authentic hardware directly to your facility. We focus on streamlining the procurement process for IT managers and network engineers by offering a secure, efficient platform for sourcing hard-to-find networking gear. By choosing us, you ensure that your hardware inventory is managed through a reliable partner dedicated to high-quality supply chain standards.
Need Help Choosing the Right Part? Talk to an Expert
-
+1 (800) 870-9487Mon-Fri 8am-5pm EST
-
support@buyrouterswitch.comTechnical support
