C2960X-STACK - Cisco Catalyst 2960-X Series Modules & Cards
-
$55.50 In Stock - Ships Worldwide Order by 2:00 PM ET for Overnight ShippingWas: $63.82You Save: $8.32 13% OFF
-
Warranty: 90-day return/replacement
Click here to read our Return Policy for returns/replacements.
C2960X-STACK
Free ground shipping within the
United States
Government, Federal & Education Procurement
We support quotes, POs, stock docs, and compliance invoicing.
Email: support@buyrouterswitch.com SAM.gov Registered Vendor CAGE Code : 23P86
overview
specifications
faqs
reviews
C2960X-STACK Overview
Cisco C2960X-STACK Dual-Ports Stacking Module for Catalyst 2960-X Series
Overview
C2960X-STACK Overview
Cisco Catalyst C2960X-STACK= Flexstack-Plus Network Stacking Module, for Use with Catalyst 2960X-24 Network Switches, Enhanced Limited Lifetime Warranty (C2960X-STACK=), 80 Gbit/s, 17128090 h, Cisco Catalyst 2960-X Cisco Catalyst 2960-XR, 254 mm, 378 mm, 76.2 mm
C2960X-STACK is a Cisco Catalyst 2960-X and 2960-XR Series Switches FlexStack Plus Stacking Module, which allows these switches stack with each other to offer flexible management.
Highlights
FlexStack-Plus is the name of the stacking technology used by the Cisco Catalyst 2960-X and 2960-XR Series switches. FlexStack-Plus is specific to the 2960-X and 2960-XR Series of switches.
Stacking Item | C2960-X | C2960-XR |
Bidirectional stack bandwidth | 80Gbps | 80Gbps |
Hot-swappable stack module | Yes | Yes |
Max stack members | 8 | 8 |
Supports FlexStack | Yes | No |
Supports FlexStack-Plus | Yes | Yes |
Mixed Stacks: FlexStack and FlexStack-Plus
The 2960-S and 2960-X support a mixed stack of 2960 models. All these 2960 models run the FlexStack protocol, allowing them to be stacked together into a single stack. The exception is the 2960-XR does not stack with either the 2960-X or the 2960-S. The 2960-XR has the IP-Lite feature set, and this is not compatible with the LAN Base feature set on the 2960-X and 2960-XR.
Mixed Stack Combination | 2960-XR IP Lite | 2960-X LAN Base | 2960-S LAN Base |
2960-XR IP Lite | Yes | No | No |
2960-X LAN Base | No | Yes | Yes |
2960-S LAN Base | No | Yes | Yes |
Quick Installation
Figure 1 shows that one C2960X-STACK module, some stack cable and four stackable switches can be installed a whole stackable switches with four members.
Next figures show how to use this C2960X-STACK.
First, C2960X-STACK should be installed in the switches which support to stack.
The stack module slot is on the back panel of the switch.
Second, Use the stack cable to connect each switch installed C2960X-STACK.
There are two stack port and stack cable should be inserted into them.
Use stack cable to connect switches one by one through professional ways.
Last, set up the stackable switches and use one of them to be the manager.
The Recommended Switches and Stack Cables
Cisco 2960X Switches | Cisco 2960XR Switches |
WS-C2960X-24TS-L | WS-C2960XR-24TS-I |
WS-C2960X-24PS-L | WS-C2960XR-48TS-I |
WS-C2960X-48FPD-L | WS-C2960XR-24PD-I |
WS-C2960X-48LPS-L | WS-C2960XR-24PS-I |
WS-C2960X-48FPS-L | WS-C2960XR-24TD-I |
WS-C2960X-48TD-L | WS-C2960XR-48LPD-I |
WS-C2960X-48TS-L | WS-C2960XR-48LPS-I |
WS-C2960X-24TD-L | WS-C2960XR-48TD-I |
WS-C2960X-24PD-L | WS-C2960XR-48FPS-I |
WS-C2960X-48LPD-L | WS-C2960XR-48FPD-I |
WS-C2960X-24PSQ-L | |
Stack Cables | |
CAB-STK-E-0.5M | |
CAB-STK-E-1M | |
CAB-STK-E-3M |
Catalyst C2960X-STACK= Flexstack-Plus Network Stacking Module, for Use with Catalyst 2960X-24 Network Switches, Enhanced Limited Lifetime Warranty (C2960X-STACK=)
- NETWORK STACKING MODULE: Designed for use with Cisco Catalyst 2960X-24 network switches
- INTERFACES: 2 stack ports
- HOT SWAPPABLE: Easily replaces existing module
- CONNECTIVITY: Wired
- PEACE OF MIND: Enhanced limited lifetime warranty
Summary Description
Cisco Catalyst C2960X-STACK= Flexstack-Plus Network Stacking Module, for Use with Catalyst 2960X-24 Network Switches, Enhanced Limited Lifetime Warranty (C2960X-STACK=), 80 Gbit/s, 17128090 h, Cisco Catalyst 2960-X Cisco Catalyst 2960-XR, 254 mm, 378 mm,
Need help with C2960X-STACK?
Get pricing, availability, lead time, and compatible options from our team. Chat with us live or email support@buyrouterswitch.com
Specification
C2960X-STACK Specification
C2960X-STACK Specifications | |
Type | FlexStack-Plus hot-swappable stacking module |
Designed For | Catalyst 2960-X Series Catalyst 2960-XR Series |
Bidirectional stack bandwidth | C2960-X: 80Gbps C2960-XR: 80Gbps |
Hot-swappable stack module | C2960-X: Yes C2960-XR: Yes |
Max stack members | C2960-X: 8 C2960-XR: 8 |
Supports FlexStack | C2960-X: No C2960-XR: Yes |
Supports FlexStack-Plus | C2960-X: Yes C2960-XR: Yes |
Net Weight | 1.6 Kg |
Package Weight | 2.24 Kg |
Frequently Asked Questions
Which specific Cisco switch models support the C2960X-STACK module? +
The C2960X-STACK module is specifically engineered for the Cisco Catalyst 2960-X and 2960-XR series fixed-configuration switches. It enables you to create a stackable architecture, allowing up to eight switches to be managed as a single logical unit. Before deployment, ensure your Catalyst switch model is stack-capable by verifying the rear-panel module slot availability on your specific hardware revision.
Does the C2960X-STACK module allow for mixed-stacking with other Catalyst models? +
This stacking module is designed exclusively for the Catalyst 2960-X and 2960-XR series. It does not support mixed-stacking with older Catalyst 2960-S switches or higher-tier platforms like the 3650 or 3850 series. To maintain system stability and avoid incompatibility errors, all switches within the stack should be running the same version of Cisco IOS software.
What is the maximum bandwidth provided by the C2960X-STACK module? +
The C2960X-STACK module provides a high-speed stacking bandwidth of 80 Gbps. By utilizing Cisco's FlexStack-Plus technology, this module allows for efficient data forwarding and control plane redundancy across the stack. This high-capacity throughput ensures that heavy traffic loads between member switches do not become a bottleneck in your enterprise network environment.
How many switches can be linked using the C2960X-STACK module? +
When using the C2960X-STACK module, you can link up to eight Catalyst 2960-X or 2960-XR switches into a single stack. This configuration provides a unified management experience, simplifying tasks like firmware upgrades, configuration changes, and monitoring, while significantly increasing the port density of your network rack without the complexity of managing individual devices.
Is the C2960X-STACK module hot-swappable during operation? +
While the C2960X-STACK module is designed for ease of use, we recommend installing the module while the switch is powered down to ensure a secure physical connection and proper initialization. After installation, you must configure the stacking settings via the CLI to integrate the switch into your existing fabric. Following proper installation procedures prevents potential issues with module detection during the boot sequence.
What cabling is required to connect the C2960X-STACK module? +
The C2960X-STACK module requires dedicated FlexStack-Plus stacking cables to interconnect the switches. These cables are available in various lengths to suit different rack configurations. It is crucial to use genuine Cisco stacking cables to maintain the integrity of the 80 Gbps backplane connection and ensure reliable communication between all member switches within your stack.
How does the C2960X-STACK module impact network redundancy? +
The C2960X-STACK module significantly improves network reliability through stack-level redundancy. If one switch within the stack fails, the remaining switches continue to operate, and the stack master election process automatically reconfigures the fabric. This architecture is ideal for mission-critical enterprise environments where maintaining constant connectivity for edge devices is a primary operational requirement.
What are the physical dimensions and port layout of this stacking module? +
The C2960X-STACK is a compact, dual-port module designed to slide directly into the expansion slot located on the rear panel of the Catalyst 2960-X chassis. The dual-port design facilitates a ring topology, which is essential for redundant pathing. Its streamlined form factor ensures it does not obstruct airflow or prevent proper cooling of the switch internal components.
How can I request a bulk quote for C2960X-STACK modules? +
For organizations planning large-scale deployments or infrastructure refreshes, BuyRouterSwitch.com provides competitive bulk pricing. Simply navigate to the product page and select the request quote option, or contact our sales team directly with your specific quantity requirements. We prioritize high-volume orders to help you meet your budgetary targets while securing essential enterprise hardware for your network.
Why should I choose BuyRouterSwitch.com for my Cisco module procurement? +
At BuyRouterSwitch.com, we specialize in providing authentic Cisco hardware to IT professionals who demand reliability and performance. By sourcing directly from our extensive inventory, we offer streamlined procurement and personalized service to ensure you receive the exact hardware specifications required for your project. Choose us to experience a seamless purchasing process backed by a team that understands the complexities of enterprise networking.
Need Help Choosing the Right Part? Talk to an Expert
-
+1 (800) 870-9487Mon-Fri 8am-5pm EST
-
support@buyrouterswitch.comTechnical support
