Dr. Bott ExtendAIR Direct
-
Warranty: 90-day return/replacement
Click here to read our Return Policy for returns/replacements.
Dr. Bott ExtendAIR Direct network antenna
Free ground shipping within the
United States
Government, Federal & Education Procurement
We support quotes, POs, stock docs, and compliance invoicing.
Email: support@buyrouterswitch.com SAM.gov Registered Vendor CAGE Code : 23P86
overview
specifications
faqs
reviews
11995 Overview
Small antenna - huge effect!
ExtendAir Direct was developed to offer optimal field strength even to devices well outside the standard range of the Apple AirPort Extreme Base Station.
Dr. Bott's ExtendAIR Direct is the only Apple-certified external antenna that expands the range of Apple's AirPort Extreme Base Station (antenna port require d) to 500 m (150 ft.).
After a successful debut in North America (Best of Show at MacWorld Expo January 2003) ExtendAir Direct also passed the tighter certification in the European Community, without reducing performance significantly.
ExtendAIR was developed to provide the maximum range for AirPort clients while maintaining the typical Apple look and feel. Installation and use are as simple as "plug in and works".
The additional performance is available immediately after a restart of the base station, no changes are require d on client computers. The antenna is recognized by the base station and listed in the administration software.
The additional performance is available to both the newer 802.11g clients (54 MBit) and traditional 802.11b clients (11 MBit) - ExtendAir Direct amplifies both signals independently of each other, working as a 2-element diversity antenna with + 6.5 dBi.
The new Power Macintosh G5 has an antenna port on the back of the case. Swapping the standard T-shaped AirPort antenna for an ExtendAir Direct (or its omnidirectional cousin, the ExtendAir Omni) enables the computer to access base stations that are further away or permits remote clients to use the G5 as a software basestation from a greater distance.
ExtendAir Direct helps create a good field for roaming or bridging, even where the built-in antennas do not reach.
The combination of antenna and the AirPort Extreme Base Station's bridge mode enables new applications that were not accessible to WLAN access points before.
Linking two remote parts of a corporate network that are seperated by a busy road is child's play. The directional beam created by ExtendAir direct focusses the field where it is needed, without opening unnecessarily large areas.
Mounting the antenna is easy, too. The antenna base stands solidly on a desk or can be attached to a wall or roof with the included mounting accessories. A joint allows for flexible orientation of the actual antenna in the require d direction, enabling both easy targeting and reliable conservation of the ideal orientation.
ExtendAir Direct (Euro)
- 8 dBi
- 5 GHz
- 50 Ω
- Vertical polarization
Summary Description
Dr. Bott ExtendAIR Direct
Need help with 11995?
Get pricing, availability, lead time, and compatible options from our team. Chat with us live or email support@buyrouterswitch.com
11995 Specifications
Overview
Manufacturer:
Antennas Direct
Stock:
In Stock.
Stock updated on:
2024-08-26
Performance
Antenna gain level (max)
10.2 dBi
Other features
Size (imperial)
50.8 cm (20")
Frequently Asked Questions
What is the primary function of the Dr. Bott ExtendAIR Direct antenna? +
The Dr. Bott ExtendAIR Direct is a high-gain directional antenna specifically engineered to extend the reach and improve the signal quality of wireless network hardware. By focusing the radio signal in a precise direction, it effectively bridges gaps in wireless coverage, making it an ideal solution for overcoming environmental obstacles or increasing throughput over longer distances.
Does the ExtendAIR Direct require specialized mounting hardware? +
This unit is designed for versatile deployment and typically comes with mounting considerations suitable for standard pole or wall configurations. To optimize performance, you should mount the antenna in a clear line-of-sight path to the target area, ensuring it is securely fastened to minimize signal jitter caused by environmental vibrations or wind exposure.
Can I use the Dr. Bott ExtendAIR with standard Wi-Fi routers? +
Compatibility depends on your router's interface. This antenna is designed to work with wireless devices that feature a compatible external connector port. Before deployment, confirm that your wireless hardware allows for an external antenna connection and matches the specific connector type supported by the ExtendAIR Direct to ensure signal integrity and avoid impedance mismatches.
How does a directional antenna improve network performance compared to omnidirectional models? +
Omnidirectional antennas broadcast in all directions, which often leads to signal wastage and interference. In contrast, the Dr. Bott ExtendAIR Direct concentrates the RF energy into a focused beam. This increased gain allows for more stable connections and higher data transfer rates across greater distances, specifically where you need to reach a target point rather than blanket an entire room.
Is the Dr. Bott ExtendAIR suitable for outdoor deployments? +
The ExtendAIR Direct is built with materials intended to withstand the rigors of deployment environments. However, while it is robust, you should always consult the specific technical datasheet regarding IP ratings before installing it in extreme weather conditions. Proper weatherproofing of the cable connections is recommended to prevent moisture ingress and signal degradation over time.
What is the recommended cable length for connecting this antenna? +
In RF engineering, signal loss increases with cable length. We recommend using the shortest possible length of high-quality, low-loss coaxial cable between your wireless device and the ExtendAIR Direct. Excessive cable runs can significantly reduce the effective gain provided by the antenna, potentially negating the performance benefits gained from its directional focus.
How do I align the ExtendAIR Direct for the best signal strength? +
Alignment is critical for directional antennas. You should physically orient the front face of the unit directly toward the intended receiving antenna or area. Utilizing a signal strength meter or your device's built-in site survey tool, perform micro-adjustments to the azimuth and elevation until you achieve the optimal signal-to-noise ratio and maximum throughput for your link.
Does the Dr. Bott antenna support both 2.4GHz and 5GHz frequencies? +
The operational frequency range is a vital specification for any antenna. You must ensure that the ExtendAIR Direct model you select is tuned for the specific frequency band used by your wireless access point or router. Operating an antenna outside of its designed frequency range will result in poor performance and high standing wave ratios.
How can I obtain a bulk quote for multiple Dr. Bott antenna units? +
For organizations looking to deploy the Dr. Bott ExtendAIR Direct across multiple sites, our team at BuyRouterSwitch.com is ready to assist. Please reach out to our sales department with your specific SKU requirements and the total number of units needed. We specialize in accommodating large-scale procurement needs and will provide a competitive quote tailored to your project requirements.
Why should I purchase my Dr. Bott wireless equipment from BuyRouterSwitch.com? +
BuyRouterSwitch.com is a trusted source for enterprise-grade networking components. When you purchase through us, you are guaranteed authentic hardware sourced through reliable channels. Our dedicated sales team focuses on providing seamless transaction experiences, ensuring your orders are handled with precision so you can stay focused on your network infrastructure goals without unnecessary administrative delays.
Need Help Choosing the Right Part? Talk to an Expert
-
+1 (800) 870-9487Mon-Fri 8am-5pm EST
-
support@buyrouterswitch.comTechnical support
