8350-989 Overview
OVERVIEW
Lantech IPGS-3008 is a high performance L2+ all Gigabit switch with 8 10/100/1000T w/8 PoE 802.3af/at Injectors which provides L2 wire speed and advanced security function for network aggregation deployment. It delivers ITU G.8032 enhanced ring recovery less than 20ms in single ring while also supports train ring, enhanced mode, multiple VLAN model with easy configuration. The comprehensive QoS, QoS by VLAN, advanced security including INGRESS ACL L2/L3, TACACS+, SSH v2/SSL, Mac based DHCP server, DHCP Option 82, DHCP server, IGMPv1/v2/v3/router port, QinQ are supported and also required in large network. It also supports Cisco Discovery Protocol (CDP) for Ciscoworks to detect the switch info and show on L2 map topology.
Miss-wiring avoidance, Node failure protection, Loop protection
The IPGS-3008 also embedded several features for stronger and reliable network protection in an easy and intuitive way. When the pre-set ring configuration failed or looped by miss-wiring, Lantech IPGS-3008 is able to alert with the LED indicator and disable ring automatically. Node failure protection function ensures the switches in a ring to survive after power breakout is back. The status can be shown in NMS when each switch is back. Loop protection is also available to prevent the generation of broadcast storm when a dumb switch is inserted in a closed loop connection.
Loop protection; Alert by email, trap, SMS
The IPGS-3008 also embedded several features for stronger and reliable network protection in an easy and intuitive way. When the pre-set ring configuration failed or looped by miss-wiring, Lantech IPGS-3008 is able to alert with the LED indicator and send out an email, trap or a SMS text. The status can be shown in NMS when each switch is back. This feature prevents the broken ring and keep ring alive without any re-configuration needed. Loop protection is also available to prevent the generation of broadcast storm when a dumb switch is inserted in a closed loop connection.
User friendly GUI, Auto topology drawing
The user friendly UI, innovative auto topology drawing and topology demo makes IPGS-3008 much easier to get hands-on. The complete CLI enables professional engineer to configure setting by command line.
Enhanced G.8032 ring, 8/16 MSTI MSTP; Optional MRP ring
Lantech IPGS-3008 features enhanced G.8032 ring which can be self-healed in less than 20ms for single ring topology protection covering multicast packets. It also supports various ring topologies that covers enhanced ring and basic ring by easy setup than others. It supports MSTP that allows each spanning tree for each VLAN for redundant links with 8/16 MSTI. Optional MRP (Media Redundancy Protocol) can be supported for industrial automation networks.
DHCP option 82 & Port based, Mac based DHCP, Option66, IPv6 DHCP server
DHCP server can assign dedicated IP address by MAC or by port (Port based for single switch) , it also can assign IP address by port for multiple switches with single DHCP option82 server. DHCP Option66 server can offer IP address of TFTP server to DHCP client for VOIP application. Optional IPv6 address resolution for DHCP service can be supported.
QoS by VLAN for legacy device
QoS by VLAN can allow switch to tag QoS by VLAN regardless the devices acknowledge QoS or not in which greatly enhance the bandwidth management in a network.
QinQ, QoS QinQ and GVRP supported
It supports the QinQ, QoS QinQ, GVRP for large VLAN segmentation.
IGMPv3, GMRP, router port, static multicast forwarding and multicast Ring protection
The unique multicast protection under enhanced G.8032 ring can offer immediate self-recovery instead of waiting for IGMP table timeout. It also supports IGMPv3, GMRP, router port and static multicast forwarding binding by ports for video surveillance application.
Editable configuration text file; Factory reset button; CPU watchdog
The configuration file of Lantech IPGS-3204MGSFP can be exported in text file so that it can be edited and configured back to switch with ease for mass deployment. Factory reset button can restore the setting back to factory default and built-in watchdog design can automatically reboot the switch when CPU is found dead. IPGS-3008 also supports dual image firmware function
Optional N-key for back up, restore configuration and upgrade firmware
With N-key, the configuration file can be mass auto backup, editable restored and auto upgrade firmware for easy maintenance.
Event log & message; 2 DI + 2DO
In case of event, the IPGS-3008 is able to send an email & SMS text message to pre-defined addresses as well as SNMP Traps out immediately. It provides 2DI and 2DO. When disconnection of the specific port was detected; DO will activate the signal LED to alarm. DI can integrate the sensors for events and DO will trigger the alarm while sending alert information to IP network with email and traps.
Relay alarm and email/trap/SMS alerting
Featured with relay contact alarm function, the IPGS-3008 is able to connect with alarm system in case of power failure and port disconnection. In case of such event, it will send out email, SMS, trap alerting to predefined users.
Dual 12V~48V input with boost technology to 54V PoE output for 12V model, PoE budget 60W
Lantech IPGS-3008-12V is designed with dual input power at 9.5V~56VDC while IPGS-3008-48V allows with 44~56VDC input. The PoE budget for 12V input is 60W and for 24V input is 120W.
Industrial hardened design for extended temperature operation
Lantech IPGS-3008 features high reliability and robustness coping with extensive EMI/RFI phenomenon, environmental vibration and shocks usually found in factory, substation, steel automation, aviation, mining and process control. It is the best solution for Automation, transportation, surveillance, Wireless backhaul, Semi-conductor factory and assembly lines.
Environmental monitoring for switch inside information
The environmental monitoring can detect switch overall temperature, voltage and current where can send the SNMP traps, email and SMS alert when abnormal.
L2+, 8xRJ-45, 16K MAC, 16 Gbit/s, 9.5-56V, 10W, 43x105x152mm, 660g
- Support IEEE802.3at/af up to 30W per port
- PoE management incl, Detection and Scheduling
- Enhanced G.8032 ring protection < 20ms for single ring. Supports enhanced mode and basic mode; Enhanced G.8032 ring covers multicast packets; MSTP 8/16MSTI /RSTP ; support MRP ring
- Miss-wiring avoidance & node failure protection
- User friendly UI, including auto topology drawing; Complete CLI
- Support LACP link aggregation, IGMP v3/router port, DHCP server & DHCP Option82; Port based DHCP distribution, Mac based DHCP server, QoS by VLAN, SSH v2/SSL, HTTPS, INGRESS ACL L2/L3,TACACS+, QinQ, SMS
- Dual 9.5V~56VDC input(12V model) or Dual 44~56VDC input(48V model)
- N-key for configuration restore, backup and firmware upgrade
- Optional Environmental monitoring function to display inside switch info incl. temperature, voltage, current, power consumption
- Managed L2+ SNMP v1 v2c, v3/ Web/Telnet/CLI
- Quality of Service (QoS) support
- Basic switching RJ-45 Ethernet ports quantity: 8
- Cat3, Cat4, Cat5, Cat5e, Cat6 10BASE-T, 100BASE-TX, 1000BASE-TX
- MAC address table: 16000 entries Switching capacity: 16 Gbit/s Multicast forwarding
- Access Control List (ACL)
- Power over Ethernet (PoE)
Summary
Lantech Communications IPGS-3008, Managed, L2+, Gigabit Ethernet (10/100/1000), Full duplex, Power over Ethernet (PoE)
